Tools/Maintenance

- Incredibly effective cleaning formula containing Nano Technology that also cares for your bike's delicate finishes - Contains no harmful acids, CFC's or solvents and is fully biodegradable - Cuts through dirt, oil and grime quickly and safely leaving your whole bike sparkling clean

Park's Bottom Bracket/Cassette Tool for Campagnolo is an indispensable tool for your Campagnolo drivetrain. It's for installing and removing all Record, Chorus, Centaur and Athena bottom brackets, and all Campagnolo cassette lockrings.

The smartest, most convenient torque key now comes with enough bits to suit every need. Make sure those stem bolts are tight enough, and double check the torque on the seatpost bolt while you're at it. The Ritchey Bicycle Torque Key is an essential tool for those important bolts. Available with 4 or 5Nm options, this 6-bit set includes just about every bit you'll need for your bike, and a convenient holder to keep it all organized. - Hex 3/4/5mm - Torx T-20/25 - Phillips #1 - 4 or 5Nm max torque - Bit holder included

- Creates a ceramic coating for incredible durability and long distance performance - Provides ultra low friction for ultimate drivetrain efficiency - Waterproof qualities excelling in wet conditions - 95% biodegradable

Park's Double-Ended Cone Wrenches are designed for home mechanics. They're made of thin tool steel to fit the low-clearance adjusting nuts and cone flats on a variety of bearing assemblies. Each wrench is chrome plated for long life and available in popular combinations from 11 to 18mm. Most applications require a pair of cone wrenches. Call or stop by. We can recommend the correct sizes for your needs.

The Park FR-4 Freewheel Remover fits Atom, Regina, splined Zeus and some Schwinn-approved freewheels. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel.

SRAM Bleeding Edge Tool. - Use with Avid or SRAM Pro Bleed Kit

Park's Freewheel Remover Wrench provides superior leverage for freewheel removal and installation. Its head slides over Park freewheel removers and features a locking knob for a secure fit.

Truing stand upright extensions install in seconds on any TS-2 or TS-2.2 Truing Stand, allowing the stand to be used on wheels with hubs up to 200mm wide (tandem, fat and downhill bikes), as well as on wheels with a 29-inch mountain bike tire installed*. In addition, specially sized bosses serve as adaptors so the stand can be used with wheels using thru-axle hubs with removable axles. Same features as the the TS-2EXT.2 with the addition of slots to secure rear drive e-bike wheels. * Note: TS-2.2 Truing Stand does not require these adaptors to accommodate 29-inch wheels but does require it to fit hub widths from 180mm to 200+mm.

Precisely machined for a perfect fit, this 8-notch tool removes and installs the lockring that retains front chainrings found on Bosch Gen 2 e-bike motors after the crank arm is removed. - Fits Bosch Active Line (chainrings less than 20 teeth), Performance Line and Performance Line CX models - For lockrings with 50mm outside diameter and 8 notches - Replacement for Bosch 0275009003 tool - Torque wrench compatible 3/8-inch square drive - Constructed of 4140 heat treated steel and plated for long life

HPG-1 Park Tool High Performance Grease is proprietarily blended to meet the demanding needs of today’s high performance bicycles and high end components. -Superior adherence and extended lubrication life -Extreme temperature range: -20°F to 540°F (-29°C to 282°C) -Highly water resistant -Perfect for high end applications including precision ground and ceramic bearings, pivots and suspension components 4-ounce (113 g) tube

Commonly referred to as a 4th Hand, Park's Cable Stretcher pulls cables tight. Its one-hand operation and thumblock holds the cable so you can easily maintain cable tension while tightening cable fixing bolts and nuts. Made from chrome-plated and heat-treated steel and featuring cushion grips for comfort, the Park Cable Stretcher is a must for any serious mechanic.

Royal Blood mineral oil is a specially formulated, low viscosity hydraulic fluid that ensures consistent performance of Magura brakes. - Doesn't absorb water - Lubricates entire braking system

Park combines the three most used bolt sizes into one convenient wrench. The 3-Way Sprocket Wrench sports 8, 9 and 10mm sockets made from forged chrome-vanadium steel in Park's classic Y-shape that offers plenty of leverage and a comfortable grip.

The use of cutting oil or fluid is extremely important when performing any cutting, tapping, facing or reaming operation and Park's Cutting Fluid is a high quality, environmentally safe cutting fluid that extends tool life and makes any frame prep job easier and safer. CF-2 can effectively be used on all metals.

Park's BBT-32 is the perfect solution for the home mechanic installing and removing Shimano and ISIS Drive splined 20-tooth bottom bracket cups. Made from investment-cast steel, the BBT-32 utilizes a flat tooth profile to ensure maximum engagement with the bottom bracket cup and features 32mm wrench flats.

- Three brush heads featuring tough nylon bristles and an integral scraper for mud de-clogging - Ideal for chain, cassette and sprockets - 10-speed compatible

Precision component screwdriver machined to exact standards to ensure a perfect fit on compatible component fasteners. Featuring an ergonomic, CNC machined and hard anodized 6061 aluminum handle.

Stan's Dual Action Repair for Tubeless (DART) fixes damaged tires faster, easier, and better than existing plug tools. While traditional tire plugs try to wedge rubber strips into a puncture, the DART creates a chemical reaction with your Stan's sealant to quickly form a permanent airtight bond. The DART's plastic tip is barbed to anchor firmly in place and stay put during even the most aggressive riding while being safer for rims, rim tape, and your hands. The material of the DART is also more flexible, and its laser-cut shape is optimized to contour to the shape of different punctures, maximizing surface area to increase the sealing reaction. Because the DART anchors to your tire and creates an instant bond with your sealant, it also won't pull out while riding the way a conventional plug can. One of the best features of the DART's design is that it doesn't require trimming once inserted, and excess material won't get in the way of your ride. DARTs can't be felt while riding, even on road tires, and they wear smooth naturally. - Repairs large punctures and slices - Reacts with Stan's sealant to form an instant, airtight seal - Barbed plastic tip anchors into tire and will not pull out when riding - Flexible material and laser-cut shape conforms to puncture and bonds with sealant - Wears off clean, no trimming needed, and can not be felt while riding, even on road tires - Lightweight, compact tool fits the shape of your hand for more precise use and includes built-in valve core remover - Includes two pre-loaded DARTs for sealing multiple and larger punctures - Clear caps keep DARTs clean and unthread quickly for fast deployment - Simple and easy to refill

Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. The FR-5.2G has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, SunRace, SunTour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also Fits Shimano disc brake lockrings - Guide pin stabilizes tool

- Developed by the Boeing company for lubrication and protection of aircraft components - Dries to a thin waxy film that clings to metal for months - Law prohibits ORM-D materials from shipping by air

Clean Ride is White Lightning's legendary self-cleaning lube. By creating a dry, waxy film on your chain this lube doesn't attract dirt and grime like traditional oil based lubricants. Should dirt work its way onto your chain or gears Clean Ride's self-cleaning action is activated causing small particles of wax to break free, taking the riff-raff with it. Not only will you spend less time cleaning your chain, you'll enhance the lifespan of your drivetrain, too!

Many chains use a master link that allows the chain to be installed and removed by hand. While master links don't require traditional chain tools, over time, dirt and corrosion can make it difficult to separate them by hand. Park's Master Link Pliers make removing and installing these master links quick and easy. Simply insert the specially sized jaws into the link and squeeze the vinyl-coated handles!

Park's Hex Wrench Set offers all the popular Allen wrenches (1.5, 2, 2.5, 3, 4, 5 and 6mm) in a convenient fold-up unit. The tool tips are chamfered for a positive grip and the one-piece fiber-reinforced-resin handle is light, comfortable, slip resistant and 40% stronger than steel.

Park’s Professional Cable And Housing Cutter is specifically for use on derailleur and brake cables and housing. It even makes quick work of hard-to-cut shift-cable housing. Its cold-forged, heat-treated-steel handles won't bend and its precision-ground jaws cut perfectly every time. Its dual-density molded grips are specially contoured for superior comfort and control. Plus, there’s a built-in cable-end crimper and a forming hole for reforming housing ends.

Fox High Performance Synthetic Suspension Fluid keeps any fork or shock operating at its best. - High performance suspension fluid formulated to provide fade-free performance - Proprietary additive eliminates stiction, friction and wear, and protects against foaming, seal-swell, oxidation and corrosion - 10-weight Red formula

It folds, it cuts, it hangs on your belt and best of all…it’s blue. Park's Utility Knife is perfect for the shop, garage, toolbox or saddlebag. The UK-1 is a combination of aluminum and stainless steel and uses readily available hardware store utility knife blades. It also features a secure, quick-change blade system that locks open.

Park Tool's Repair Stand Base is a steel base plate for the PRS-2 OSLB, PRS-2 OS-1, PRS-2 OS-2 Repair Stands (each sold separately). - 23" x 35" x 7/16" steel plate - Approximately 118 lbs - Black painted

Improperly aligned frame or fork dropouts can cause bent axles and quick-release skewers, as well as tracking and shifting problems. The Frame and Fork End Alignment Gauge Set quickly determines whether the frame or fork dropouts are aligned and parallel. If an error is detected, long handles and comfortable molded grips afford plenty of leverage for straightening. These Park gauges adjust to compensate for various hub widths from 100mm to 160mm, too.

Periodic hydraulic remote bleeds are necessary to maintain consistent performance. RockShox's Bleed Kit has everything you need to keep your Reverb and X-Loc remotes functioning at their best.

• Penetrating all purpose lubricant with PTFE • Repels moisture and prevents rust and corrosion • Use on chains, cables and pivot points • Loosens rusted and corroded nuts and bolts • Ideal for all conditions wet, dry, road and trail • 12 ounces

Bio ChainBrite Bicycle Chain and Component Cleaning Fluid is a 100% biodegradable, natural, plant-based degreaser formulated for use in Park's CM-5.2 Cyclone Chain Scrubber or as a general purpose degreaser. It won't harm alloy, plastic, or rubber parts. Use CB-4 full strength, do not dilute with water. Cover parts in solvent and scrub using a brush. 16-ounce bottle

This handy tool will save time and frustration! Quickly and accurately cuts hydraulic brake line then precisely installs hose barbs into the tubing when the brake line is either on or off the bike. - Cuts hydraulic brake hose (does not cut steel braided hydraulic hose) - Installs press-in style barbed hose inserts - Replaceable parts including push pin tip and stainless steel blade - Hard anodized body for improved tool wear - Lightweight, CNC machined aluminum body Replacement parts: - 2494K Cutting Blade (set of 2) - 2497 Push Pin Tip

Park's versatile Headset Wrench is constructed from hardened, laser-etched steel for the maximum in durability and precision. The HCW-15 is a dual sided wrench that features a 32mm opening on one end and a 36mm opening on the other.

Unique wax/water emulsion bicycle chain lube contains more than twice as much wax as solvent based wax lubes, so it lasts more than twice as long as traditional lubes. - Does not attract dirt or grime to your chain and no degreasing is required or recommended - 100% biodegradable

Made from high precision, hardened Cro-Moly steel, Park's Bottom Bracket Tool (External Bearing) can be turned with a 3/8" drive wrench, 1" wrench, or Park Tool FRW-1 Freewheel Remover Wrench (each sold separately).

The majority of bicycle maintenance is precision work, and the Dual-Sided Pick takes things to a whole new level. Ideal for removing debris from tires and brake pads, mud and grit from pedals and cleats, grabbing cartridge bearing and suspension seals, or managing any number of other detail work procedures. The overmolded, file-tread grip provides excellent grip and excellent control. The in-line and angled arm shapes are complimentary for intricate work. Available separate, or found in our Team Edition Tool Kit. - Hardened CRV tool steel shafts resist bending under stress - In-line and 90-degree arm shapes combine to simplify countless precision applications - Overmolded ergonomic file tread grip prevents hand fatigue and promotes excellent control - Ideal for removing unwanted debris from bike accessories and components

Shimano Hydraulic Disc Brake Fluid - Non-corrosive mineral oil that offers excellent heat expansion properties - Mineral oil will not absorb water from the air - Not caustic and is non-toxic

Three of the most common Torx compatible wrench sizes in our classic 3-way design. The TWS-3 is useful for disc rotor bolts (T25), chainring bolts (T30), and hydraulic brake work (T10). TWS-3 FEATURES - T10, T25 and T30 Torx compatible set - Wrenches made from industrial tool steel, through hardened and tempered for long life

Stan's 2oz Tire Sealant Injector measures the desired amount of sealant then attaches to your valve stem for easy, no-mess application. And, it works on Presta and Schrader valves!

Park Tool's 8mm and 10mm Metric Flare Wrench is used to safely open and close the compression nut on hydraulic brake calipers and levers. The MWF-1 features angled heads for easy access, and unique, semi-box openings to reduce the risk of damage to the compression nut and brake line.

Jagwire's Pad Press Plus is a handy tool that makes removing and installing cartridge brake pads quick and precise. The holder and lever action makes it easy to hold the brake shoes while you push out the pad inserts and press in the replacements. And you can bolt this fine tool to a workbench with the included screws to make the job even easier.

This 29mm open bore adapter is used to press 29mm x 42mm (DUB) sealed bearings. The adapter is machined with one step at 29mm OD, which fits into the center of the sealed bearing. For use with Wheels Mfg. bottom bracket press (PRESS-7 , PRESS-7-PRO or PRESS-9-PRO). - Inner step outer diameter: 28.9mm - Outer diameter: 41.8mm - Thru hole diameter: 12.8mm (1/2-inch) - Thickness: 7mm - Machined, red anodized aluminum - Sold individually

This classic pink Bike Cleaner has incredible cleaning power because it contains Nano Technology that breaks down dirt and grime on microscopic levels, while also caring for your bike's delicate finish. Muc-off's pink cleaner is biodegradable, free from acids, CFC's and solvents, and it's alkaline based so you can clean away with a guilt-free conscience. It's safe on all surfaces, and it's even disc brake rotor and pad friendly. - Safe on all parts and surfaces including carbon fiber - Will not harm seals, cables, brake pads or rotors - Effective road bike & mountain bike cleaner - Safe on anodized metal - Alkaline based and free from CFCs, solvents or acids - Nano Tech Formula cleans on a molecular level - Biodegradable - Dispenser tap available separately, LU1700

Recommended by DT Swiss for lubrication of Ratchet mechanisms found in DT's Ratchet, Ratchet EXP and Ratchet LN hubs

Park's Torx Wrench Set is just what you need to make repairs on many of your bike parts that use Torx (star-shaped) fittings, such as disc brakes, pedals, chainring bolts, and others. It offers the common bicycle wrench sizes (T7, T9, T10, T15, T20, T25, T27, T30 and T40) in a convenient fold-up set. Its composite handle is super strong, comfortable to use and slip resistant.

Park's Hex Wrench Set offers 3, 4, 5, 6, 8, and 10mm Allen wrenches with chamfered tips for a great grip and easy use. The one-piece fiber-reinforced-resin handle is light, comfortable, slip-resistant, and 40% stronger than traditional steel handles.

The Vittoria Road Tubeless Tool-Kit will make the installation and removal of your tubeless tires easy and quick. Each kit contains one pair of pliers and clips per package. The patented plier design provides a gentle yet secure grip on the tire, which is needed when removing the tire bead from the rim. This creates space for the included clips to be inserted between the tire and rim. Additionally, the handles of the pliers are designed to be used as tire levers, during mounting and dismounting, and are designed to prevent damage to the rim and tire. The Vittoria Road Tubeless Tool-Kit is necessary for the Air-Liner Road removal from your wheel.

Now you can easily tackle any crank bolt with Park's Crank Wrench. It features a dual-sided head with a 14mm socket and 8mm Allen wrench on a long, vinyl-coated handle so you're sure to have the leverage necessary for the job.

Park's PolyLube is specifically formulated to protect bearing components. Its Polyurea grease has extremely high shear strength to protect bottom brackets, headsets, pedals and hubs. Use it on threads, seatposts, stems and cables, too. It's also safe for fork seals, and repels water.

Shimano Genuine disc brake bleed Funnel unit for ST type Road brake lever (M7 thread bleed port) Features: - Oil spill guard lid with an integrated oil stopper holder - Funnel base - Bleeding instructions available for download under 'Documents & Links' below

Muc-Off Waterless Wash is a highly advanced, easy to use spray which cleans and polishes in seconds without the need for water. It details your whole bike, motorcycle or car in seconds leaving behind a streak free shine. Its innovative formula is designed to encapsulate any surface dirt to prevent scratching. Use it to remove light contaminants in between major washes. - Cleans and polishes in one application - No need for water - No residual dust or streaks - Powder-free - Great for eBikes - no danger of getting electrical contacts wet

Park's PolyLube is specifically formulated to protect bearing components. Its Polyurea grease has extremely high shear strength to protect bottom brackets, headsets, pedals and hubs. Use it on threads, seatposts, stems and cables, too. It's also safe for fork seals, and repels water.

The Park Tool FR-5.2GT is designed specifically for use when removing and installing cassette lockrings from thru axle hubs. -Utilizes a 12mm guide pin to stabilize the tool during use - Fits 12-spline cassette lockrings from Shimano, SRAM (including 1x), SunRace, SunTour, Chris King and others (23.5mm diameter) - Fits some Shimano and similar disc brake rotor lockrings

Secure engagement, easy to use, and fast! The CP-1.2 quickly grips cogs from 9 to 24 teeth with no manual adjustments. A great shop tool, the CP-1.2 is 13.7-inches (35cm) long and can be used with one hand to hold any 5-speed to 12-speed road or mountain cassette solidly during lock ring removal. Forged steel construction with a spring loaded return and comfortable dual density grips.

Park's Compact Crank Puller is used to remove Shimano Octalink, ISIS Drive and square-taper cranksets. It includes 2 rotating tips (16.3 and 11.3mm) to make the job easy. This is a great tool for your travel and home tool kit.

To prevent poor shifting and uneven drivetrain wear, most manufacturers recommend chain replacement at or before 1% stretch. Now you can quickly and accurately determine the wear and stretch of any chain with Park's Chain Checker. Simply insert the Chain Checker’s pins into 2 links, press the swingarm gauge tight, and then check the gauge window for an accurate reading!