All Bikes & Gear

The PRS-4.2 is a professional quality bench mount repair stand designed and built to withstand the rigors of everyday shop use. Includes three mounting holes, making it possible to clamp as high as 16.25" (41cm) from the bench surface. - The 100-3D Micro-Adjust clamp grips nearly any tube from 7/8" to 3" (23mm to 76mm), including aero tubes - The clamp jaws are nominally 2.75 inches (7cm) wide - Clamping height can be raised from 6.5" to 16.25" (16cm to 41cm) above the bench surface - Clamp rotates 360 degrees - Heavy gauge steel tubing - Chrome plated for durability

Precisely machined for a perfect fit, this 8-notch tool removes and installs the lockring that retains front chainrings found on Bosch Gen 2 e-bike motors after the crank arm is removed. - Fits Bosch Active Line (chainrings less than 20 teeth), Performance Line and Performance Line CX models - For lockrings with 50mm outside diameter and 8 notches - Replacement for Bosch 0275009003 tool - Torque wrench compatible 3/8-inch square drive - Constructed of 4140 heat treated steel and plated for long life

Truing stand upright extensions install in seconds on any TS-2 or TS-2.2 Truing Stand, allowing the stand to be used on wheels with hubs up to 200mm wide (tandem, fat and downhill bikes), as well as on wheels with a 29-inch mountain bike tire installed*. In addition, specially sized bosses serve as adaptors so the stand can be used with wheels using thru-axle hubs with removable axles. Same features as the the TS-2EXT.2 with the addition of slots to secure rear drive e-bike wheels. * Note: TS-2.2 Truing Stand does not require these adaptors to accommodate 29-inch wheels but does require it to fit hub widths from 180mm to 200+mm.

Many new bikes do not include pedals. Park Tool's DP-2 Threaded Dummy Pedal easily threads into the drive side to take the place of a pedal when making adjustments during the assembly of these bikes. Use of the DP-2 is much quicker than using a pedal wrench to install and remove an actual pedal during assembly.

- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver

- Aheadset preload adjusting bolt

This is a single replacement pin for Park Tool HCW-4 and SPA-6 pin spanner wrenches.

Her' Chamois Butt’r was developed by a female sports medicine physician in cooperation with professional women cyclists. It's a non-greasy skin lubricant that improves your riding comfort by preventing rubbing and chafing. Her' utilizes premium ingredients including aloe vera, green tea leaf extract, tea tree oil, shea butter and lavender oil for their naturally occurring beneficial properties. It's safe for use on even the most delicate fabrics and it washes right off the skin and out of shorts easily with soap and water. - To use: rub 1/6 to 1/3 ounce on your skin or chamois - No gluten, paraben, fragrance or artificial color - Meets the FDA’s Good Manufacturing Practices - No animal testing utilized

Sunlite's Cable End Button replaces the worn out piece that goes between your brake cable and the brake lever body. Replacing it along with cables and housing helps add new life to your brakes and shines u the bike, too!

Replacement bearing for the lower half of YST8003 #7 headset.

Replace the top bearing in your YST8300 headset with these caged ball bearings.

Interlok spacers nest into the lip of Cane Creek headset uppers for a rock solid, flex-free fit. - Composite construction

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

- Converts Schrader rims to Presta - Rubber - Sold individually

- Longer B-screw needed when using 40t or 42t cog with most Shimano derailleurs

Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.

- For water bottle braze-ons - Type: Cage bolt

Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels. - 14mm x 1mm (1411-AN) sold in pairs - All others sold individually

The combination of fast and medium-burning carbohydrates in Clif’s Energy Gels provides you with a steady stream of usable fuel during workouts and races. Electrolytes help balance your fluid levels, while caffeine in three of the flavors gives a boost to your central nervous system and releases free fatty acids into your bloodstream, which can help spare your body’s limited glycogen stores. Clif uses 90% organic ingredients and a thin consistency that goes down easy in both hot and cold weather. Even the packaging has a special touch—the opening is narrow and has a litter-resistant leash, the corners are rounded for jersey pocket comfort, and each packet has a reduced carbon footprint.

The combination of fast and medium-burning carbohydrates in Clif’s Energy Gels provides you with a steady stream of usable fuel during workouts and races. Electrolytes help balance your fluid levels, while a heavy dose of caffeine gives a boost to your central nervous system and releases free fatty acids into your bloodstream, which can help spare your body’s limited glycogen stores. Clif uses 85% organic ingredients and a thin consistency that goes down easy in both hot and cold weather. Even the packaging has a special touch—the opening is narrow and has a litter-resistant leash, the corners are rounded for jersey pocket comfort, and each packet has a reduced carbon footprint.

- 8x1mm Allen head

- Model: Replacement bolt - Compatibility: Allen, M5x16

More versatile than other energy gels Honey Stinger Energy Gels may be consumed straight from the packet before or during activity, spread on toast, stirred into tea, or anything else you can think of. All flavors mix well with water to make a natural energy drink. When to Consume Honey Stinger Gels are optimized for efficient fueling before and during athletic efforts. Gels provide instant, honey-powered energy that lasts, which delays muscle fatigue and gives your body the power to achieve your goals. Acai Pomegranate Resembling our popular Pomegranate Passionfruit Energy Chews in taste; the delicious flavor of Acai Pomegranate will not disappoint. Certified Gluten-Free with organic tapioca syrup, organic honey, added electrolytes and a blend of natural acai and pomegranate flavors, this gel will keep you fueled for any athletic endeavor. Fruit Smoothie What could be better than our Fruit Smoothie Energy Chews? Our great-tasting Fruit Smoothie flavor in gel form. Certified Gluten-Free with organic tapioca syrup, organic honey, added electrolytes and a blend of natural fruit flavors, this gel will keep you fueled for any athletic endeavor. Vanilla Vanilla is one of the most widely used flavors around the world with a mild yet delicious taste, which made it a natural decision to include in our organic gel line. Certified Gluten-Free with organic tapioca syrup, organic honey, added electrolytes and natural vanilla, this gel will keep you fueled for any athletic endeavor. Mango Orange The flavor combination of tropical mangoes and perfectly ripe oranges will keep you energized for all adventures. Certified Gluten-Free with organic tapioca syrup, organic honey, added electrolytes and a blend of natural mango and orange flavors, this gel will keep you fueled for any athletic endeavor.

KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains

Type: Patch Cement Size: Individual tube

Clif Bars are a delicious source of healthy energy and are full of essential vitamins and minerals. Made with high-quality, organic ingredients, Clif Bars are a perfect go-to food whether you’re on the bike or just need a quick snack at the office. They contain 10 grams of protein and are made with real fruit, nuts, and whole grains. They contain no hydrogenated oils or artificial flavors.

The athletes and foodies in the Clif kitchen have crafted a different kind of energy bar. CLIF Nut Butter Filled Bars bring together two great energy foods – a delicious, creamy nut butter inside an organic energy bar – to deliver sustained energy. - Certified USDA organic, non GMO - Low glycemic (low glycemic-index foods digest slowly for prolonged levels of energy) - Does not contain partially hydrogenated oils, high fructose corn syrup, or artificial flavors

- Aluminum w/lock nut and mount - Slotted mount design

- Crank dust cap - Works with most three-piece crank models

ODI Ear Saver Face Mask Straps will help free your ears from the rubbing and chaffing that can happen on the back of your ears when wearing a face mask. Straps can also be used create a more secure and snug fit between the mask and your face for an improved barrier against infections, and even to help prevent your glasses from fogging up with each breath. - Made from recycled grips - Simply insert your mask straps into the one of the three available slots to get the desired fit - Straps have just the right amount of "grippiness" without tangling or pulling the hairs out of the back of your neck